The difference between UV DTF and DTF heat transfers
If you've had a look at our transfers, you've probably noticed that two of them have almost the same name. DTF heat transfers and UV DTF transfers do have a lot in common, but they're made for completely different surfaces, and the names don't make it any easier to keep them apart. So here's a proper walkthrough of how they differ, how you apply each one and which one is right for your project.
TL;DR:
What's the difference between DTF and UV DTF transfers?
DTF heat transfers are made for fabric and go on with heat. UV DTF transfers are made for hard, smooth surfaces like glass, metal, plastic and ceramics, and go on with pressure only.
What does the UV in UV DTF mean?
UV DTF transfers are printed with UV-curable ink. DTF stands for Direct-to-Film, which both transfers have in common.
Can you put UV DTF transfers on clothes?
No, UV DTF doesn't work on fabric. For T-shirts, hoodies and tote bags you want DTF heat transfers.
Do you need a heat press for DTF and UV DTF transfers?
For DTF, yes, or an iron. UV DTF transfers need no heat and no tools, you just press them on by hand.
Same family, different letters
Both transfers are made with DTF, which is short for Direct-to-Film. Your design is printed onto a clear film, and when you apply it, the film is peeled away and only the ink and adhesive stay on the surface. That's why neither of them has a sticker edge or a background around the design, and the result looks like it was printed right onto the item.
The difference lies in the ink and the adhesive. DTF heat transfers are coated with a fine adhesive powder that melts into the fibers when you heat it, so the print bonds with the fabric. UV DTF transfers are printed with UV-curable ink and an adhesive that grips hard surfaces when you press it on. In other words, one is made for your clothes and bags, and the other for things like glass, metal, plastic and ceramics.

DTF: bring the heat
You'll need a heat press or a regular iron. Place the transfer where you want it, press it on with heat, let it cool for a few seconds and peel off the film. A heat press needs less time than an iron, but both get the job done.
Once it's on, wash the garment inside out at up to 60°C (140°F) and avoid ironing directly on the print. You'll find all the temperatures and times in our step-by-step guide.

UV DTF: just press and peel
You don't need any tools, just your hands. Make sure the surface is clean and dry, peel off the release liner, place the design and press it down firmly. Then peel off the top film, and the design stays on the surface.
They can't be repositioned once they've touched the surface, so I'd always plan the spot before pressing. Need the same design in more places? Order a few extra and you're covered.
The printed on look
A DTF heat transfer becomes part of the fabric. It stretches with the garment, so it works on fitted clothing like leggings and activewear as well as tees and tote bags, and it resists cracking, peeling and fading through wash after wash.
A UV DTF transfer sits on top of the surface instead. It's slightly raised, and the cured ink forms its own glossy finish, so there's no need for a laminate. It's waterproof and scratch-resistant, and since the adhesive is permanent, it's harder to remove than a regular sticker. For bottles and cups, hand-washing is the way to go, as the dishwasher can shorten its life.

The transfers in action
DTF heat transfers
Here’s Lisa Champ, aka Red Halftone, putting one of her designs onto a shirt with a DTF heat transfer. Her bold artwork goes from film to fabric in no time, and it’s ready to wear.
UV DTF transfers
Kevin wanted a small logo on his gravel bike for a bikepacking trip. Transparent stickers showed their edges under all the dirt, so he went for a UV DTF transfer, where only the ink ends up on the frame.
Designing for DTF and UV DTF
Both transfers are printed in full color with a white layer, and that's where the similarities in your design file end.
DTF heat transfers handle detailed artwork really well, from tiny text and smooth gradients to photorealistic images. You can order them as single transfers or gather several designs on one sheet, which makes them a good fit for small batches and one-off projects.
UV DTF transfers are great for intricate shapes, cut-out letters and designs with several separate parts, since only the artwork itself ends up on the surface. Color gradients work, but fades to transparent don't, because the ink is either printed or not. They arrive on a ready-to-use sheet, so you can apply them straight away.

Ready to transfer your design?
If your design is going on a T-shirt, a hoodie or a tote bag, DTF heat transfers are the ones to pick. If it's going on a bottle, a phone case, a toolbox or anything else hard and smooth, go with UV DTF. Both are printed in full color, both leave nothing but your design behind, and both are made to last.
Upload your artwork, choose your size and we'll print it for you. Order a few for yourself or a whole batch for your brand, and see how good your design looks on something new.

:quality(60))